How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jamie_2013 Your Own Question
Jamie_2013
Jamie_2013, Handyman
Category: UK Appliance
Satisfied Customers: 1485
Experience:  worked on appliances for around 6 years
76126576
Type Your UK Appliance Question Here...
Jamie_2013 is online now
A new question is answered every 9 seconds

My wave touch electric stove started beeping about 20

Customer Question

My wave touch electric stove started beeping about 20 minutes ago. Two of the burners have letters on the control. One has an "E" and the other has either a "1S or 15" displayed
Submitted: 1 year ago.
Category: UK Appliance
Customer: replied 1 year ago.
I'm in the U.S.. Are you familiar with American products? The beeping is driving me crazy. If you can't give me a solution within a half an hour, I want to cancel.
Expert:  Jamie_2013 replied 1 year ago.

That is actually an E15 error.

E15 Failure Mode - Internal ESEC error or Signal loss between ESEC 30 UIB and ESEC relay board.

1. Check harness and connections between connector P6 of ESEC30 UIB to

connector J2 of ESEC relay board. Repair or replace harness as needed.

2.. If connection and harness are good, then replace ESEC relay board.

3. If error remains replace ESEC30 UIB.

4. If the previous steps do not resolve the failure replace the TST panel.

Using the Star Rating Chart at the top of your page and rating me at least a 3 star is how I receive credit for helping you. Please if you do not understand my answer, don't hesitate to ask for more help. Thank you for using Just Answer.

Customer: replied 1 year ago.
Where is the harness that you are talking about? Is there a schematic drawing of the area? How can I get it to stop beeping so I can go to sleep?
Expert:  Jamie_2013 replied 1 year ago.

To stop the beeping you will need to turn the breaker off. I will see if I have a diagram.

Expert:  Jamie_2013 replied 1 year ago.

I need a model number.

Customer: replied 1 year ago.
Model # *****
Expert:  Jamie_2013 replied 1 year ago.

I don't have a wiring diagram for this.