How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob
Rob, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 6991
Experience:  20 yrs. experience with a major worldwide manufacturer.
14831508
Type Your UK Appliance Question Here...
Rob is online now
A new question is answered every 9 seconds

Machine starts to run then stops

Customer Question

Machine starts to run then stops
Submitted: 1 year ago.
Category: UK Appliance
Customer: replied 1 year ago.
To be more specific - I have a swan sw2010w washing machine, it stopped running then the 2 lights on the front started flashing (it liked to occasionally dump water out the front) When i turn it on ANY programme it just flashes both light, however i could open the door whilst i was awaiting for the lights on the front to come on. So i have bipassed the door switch to try and diagnose the problem, now i dont get the 2 flashing lights, i hear drain pump come on for about 2 seconds then stops and nothing else after that. instead of the two lights flashing the pause/play button flashes.
Expert:  Rob replied 1 year ago.

Hello,I'm so sorry for the extended wait time, whilst I was offline. Do youstill need help with this?

Ifso, I will try to locate some information on this for you.

This sounds like an issue with the mani board, which is not uncommon on these.

Can you tell me the age and how many times a week it is used?

If you select spin, will it spin and finish correctly?

Thanks

Rob

Thanks

Rob