How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: UK Appliance
Satisfied Customers: 19126
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your UK Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I refer to my Whirlpool dishwasher that has stopped in the

Customer Question

Good morning
I refer to my Whirlpool dishwasher that has stopped in the middle of a cycle and "F3" is flashing on the programme screen. How would I fix this?
Many thanks.
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! That error means that there is an issue in the heating circuit. The element may be faulty, a wiring issue, etc. Do you have a meter to test with?

Customer: replied 1 year ago.
Hi Kelly, I don't have a test meter, I have been told that the u board has to be replaced at a considerable expense by a technician here in South Africa?
Expert:  Kelly replied 1 year ago.

It could be the board, but also may be a heater, thermostat or wiring/connection issue.

Customer: replied 1 year ago.
What would you advise as I really do not want to have to spend R2 500-00 on a new board? Could you recommend a Whirlpool technician here?
Expert:  Kelly replied 1 year ago.

Follow the link below to schedule service.

CLICK HERE