How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: UK Appliance
Satisfied Customers: 21545
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your UK Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I have a Miele g1290 SCU. It shows F14 error after approx. 2

Customer Question

I have a Miele g1290 SCU. It shows F14 error after approx. 2 min. It takes in water correctly, then it tries to start the circulation pump I believe, but it just says some clicks sounds and after one minute it stops showing the error code f14. Then it empty all the water out to the drain.
Tanks Rene
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! The issue is likely with the wash motor being unable to start. When you hear the clicking, that is likely the relays closing to energize the wash motor. Can you also hear any humming or buzzing noises? It may be very hard to hear so you may need to place an ear on the door to hear it.