How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel T. Your Own Question
Daniel T.
Daniel T., Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 14820
Experience:  25+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your UK Appliance Question Here...
Daniel T. is online now
A new question is answered every 9 seconds

My whirlpool add 7450 integrated dishwasher stops during

Customer Question

My whirlpool add 7450 integrated dishwasher stops during cycle and beeps 7 times. Can you advise?
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Daniel T. replied 1 year ago.

Hi

7 flashes is usually down to a flow meter failure.

You'll need to take the appliance out and remove the left hand panel.

Unplug the appliance first.

Once the side panel (and any necessary to get that off) is off, face the side.

At the bottom right of the tank you'll see a tiny circuit board and a 2 wire plug.

Pull the plug off, put it back on. do this 2 or 3 times then try the appliance again.

If it still fails then either the flowmeter or the main control board is faulty.

The flowmeter comes with the large plastic tank.

Hope this helps

Let me know how it goes.

Regards