How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: UK Appliance
Satisfied Customers: 21207
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your UK Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

My Electrolux washer works fine on regular cycles but on

Customer Question

My Electrolux washer works fine on regular cycles but on specialty cycles I get a no fill error.
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Daniel T. replied 1 year ago.

Hi

Can you post the model number of the washer please.

Also i take it the error code you get is E10 is it?

Regards

Customer: replied 1 year ago.
Model number EWFLS70JSS0
Customer: replied 1 year ago.
It just says no water there is no code number that appears.
Expert:  Daniel T. replied 1 year ago.

Hi

Ok i think this is a US model washer. The question has come up in the UK appliance section. I dont have access to any service info on your model.

I will opt out of this and another expert will pick this up that has the correct info to help you.

Regards

Customer: replied 1 year ago.
Ok. Thanks
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! I suspect you have a hidden error code stored in the electronic control. There is a method to get the stored codes, the instructions are available below. Can you please let me know what error codes you are able to retrieve?