How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Rob Your Own Question
Rob, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 6991
Experience:  20 yrs. experience with a major worldwide manufacturer.
Type Your UK Appliance Question Here...
Rob is online now
A new question is answered every 9 seconds

I have a replacement motor Philips cooker hood.original is

Customer Question

I have a replacement motor for my Philips cooker hood.original is about 20 years old and the replacement has some differences.
I need to know how to rewire the new motor to the 3 speed switch motor pt no is4***-***-****2 brown black and grey wires original on one end of the motor with a blue on the other.
Thanks if you can help
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Rob replied 1 year ago.

Sorry for the delay inreplying, I only just came online and saw your question. Are youstill looking for help with this?

If so, can you tell me the model number?



Customer: replied 1 year ago.
I have not had a solution from the advisor just an apology.
I am away for a week from home but will respond when I return homeDick Knifton
Expert:  Rob replied 1 year ago.



Customer: replied 1 year ago.
The cooker hood is model AKB063/PH/03,just need to know which wires to solder onto which motor terminal as the layout is slightly different, which after 20 years I would expect.
Thank you for your attention
Dick Knifton
Expert:  Rob replied 1 year ago.

Hi Dick

Thanks for the model number

Ihave put a call out for the schematics of this machine

WhileIm waiting Ill opt out.

Thismeans that if someone else has this information, they will respond toyou directly.

Inthe meantime, please DO NOT rate or respond to this question, as thiswill lock your question



Customer: replied 1 year ago.
Dear Rob,
Have you had any response to your request for a schematic . I really need to fix my extractorDick
Customer: replied 1 year ago.
Dear Rob, or someone who can help,
I am still hopeful of a solution to my request for help which so far has not been answered.
can anyone advise me what the answer is, should I forget the whole idea of helpDick