How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel T. Your Own Question
Daniel T.
Daniel T., Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 14807
Experience:  25+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your UK Appliance Question Here...
Daniel T. is online now
A new question is answered every 9 seconds

I have a wae24060gb with a flashing rinse light, i have

Customer Question

hi i have a wae24060gb with a flashing rinse light , i have cleaned the motor and fitted a new pair of brushes ,i just need to know how to reset the fault code
Submitted: 1 year ago.
Category: UK Appliance
Customer: replied 1 year ago.
Please can you let me know how long it will be before I get a reply to my last question?
Expert:  Daniel T. replied 1 year ago.
Hi, I'm Daniel and I'll be helping you today I've been repairing white goods for 20+ yrs. and currently work for a well-know manufacturer.
Sorry for the delay in getting to your question. Do you still need help on this?
Regards
Customer: replied 1 year ago.
please
Expert:  Daniel T. replied 1 year ago.
Hi
Ok to reset the control board do the following and this should reset the code from there.
Turn the knob to the off position.
Turn the knob to the 6 o'clock position.
Press and hold the spin reduce button.
While holding it, turn to the 7 o'clock position.
Release the spin button after a few seconds.
Turn the knob to the off position.
Try that and see how it goes and let me know.
Regards
Customer: replied 1 year ago.
Hi Daniel.
I am away from the workshop at the minuteI will try that And get back to you asap
Thankyou
Expert:  Daniel T. replied 1 year ago.
Hi
No worries thats fine.
Regards
Customer: replied 1 year ago.
Good morning Daniel
I have tried on all three buttons with no success, the three buttons are
Start
Rinse plus
Express wash
Expert:  Daniel T. replied 1 year ago.
Hi
Ok try this way instead and see what happens.
Turn the dial to off.
Press and hold the start button for atleast 3 seconds. Or the other 2 option buttons.
Then with that held in turn the dial 1 click anticlockwise
Then let go of the buttons.
Now turn the dial to off again and then retry it and see what happens from there.
But if you want to have a lok at the test cycle on this then copy and paste the link below and then you can download and save it.
http://www.mediafire.com/view/lsd8x68crseqkod/WAE24060GB_Tech_Sheet.pdf
Regards