How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel T. Your Own Question
Daniel T.
Daniel T., Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 15157
Experience:  25+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your UK Appliance Question Here...
Daniel T. is online now
A new question is answered every 9 seconds

Beko dsfn 1532 w, just making humming noise, hubby has taken

Customer Question

Beko dsfn 1532 w, just making humming noise, hubby has taken back off pump seems ok etc but still no joy
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Daniel T. replied 1 year ago.
Hi Were abouts is the humming noise comming from? If you reset it and start a new cycle does the drain pump run? Regards
Customer: replied 1 year ago.
Not sure sounds like the bottom, I did a reset started new cycle, still make a humming, buzzing noise but drain pump does not run
Customer: replied 1 year ago.
The noise seems to be coming from inlet solenoid he thinks
Expert:  Daniel T. replied 1 year ago.
Hi Ok if its from the valve then its asking for water but not getting it, Im taking it the water supply to the dishwasher is fine?If so then remove the left hand side panel.From there look in the bottom left corner and you will see the internal hose going from the water valve to the flow meter or filling tank.Check that hose and see if its knicked up as this can happen on these.If it has then remove the hose and cut a bit of the end and strighten it out and refit it and retry it from there and see how it goes. Check that first and see what you find and let me know. Regards
Customer: replied 1 year ago.
We have machine on worktop, can see hose it is not kinked.Water ok to machine has had to switch it off to pull out machine
Expert:  Daniel T. replied 1 year ago.
Ok so is the humming noise defently from the fill hose?When you set it going fill the fill hose at the back were it screws to the water valve and do you feel it vibrting?
Customer: replied 1 year ago.
How many volts should there be at the inlet solenoid
Customer: replied 1 year ago.
Yes it is vibrating
Expert:  Daniel T. replied 1 year ago.
Hi Ok if thats vibraing then theres power to it and its asking for water but not getting it. If the clear internal fill hose inside the dishwasher isnt kinked and water supply to it is fine then it can only be the water valve itself. As the valve is humming then it can only be the water supply, The internal hose or the water valve itself. Nothing else in there will cause this fault you have. So if the hoses are fine you are left with just the water valve here im afraid. Regards
Customer: replied 1 year ago.
Any ideas best place to source one?
Expert:  Daniel T. replied 1 year ago.
For spares on these you will be best with the site below. Click here Regards