How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel T. Your Own Question
Daniel T.
Daniel T., Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 15172
Experience:  25+ yrs. experience in white goods repair. NVQ Level 2 electronics manufacturers training courses.
15468697
Type Your UK Appliance Question Here...
Daniel T. is online now
A new question is answered every 9 seconds

Rob my bosch classixx 1200 express will not start. All the

Customer Question

Hi Rob my bosch classixx 1200 express will not start. All the spin speed lights are flashing and the wash light but the start button is not lit also the door is not locked. after a few minutes the lights stoop flashing and stay on but nothing will start
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Daniel T. replied 1 year ago.
Hi, I'm Daniel and I'll be helping you today I've been repairing white goods for 20+ yrs. and currently work for a well-know manufacturer.
Can you post the full model number please from the sticker on the inside of the door. It will start E-nr
Also which of the spin lights are flashing?
Number them from top to bottom with 1 at the top and let me know.
Regards
Customer: replied 1 year ago.
the model no is Enr wae24162uk/08 thespin lights are all on also the light for rinse/hold and the wash light are also lit
Expert:  Daniel T. replied 1 year ago.
Hi
Ok try this and see if it clears the flashing lights.
Turn the appliance knob to the off or reset position, 12 o'clock.
Turn the knob to the 6 o'clock position.
Press and hold the spin reduce button.
Whilst holding it, turn the knob to the 7 o'clock position.
Continue holding the spin button for about 5 seconds.
Release the button.
Turn the knob to off.
Now turn it back on and see what happens from there and let me know.
Regards
Customer: replied 1 year ago.
no good. The button for changing the spin speed is not lighting up or working
Customer: replied 1 year ago.
are you there?
Customer: replied 1 year ago.
hello
Customer: replied 1 year ago.
can u tell me approx. how long before u reply?
Expert:  Daniel T. replied 1 year ago.
Hi
Im here i was just having my dinner when you replied back.
If thats not worked and theres still nothing you can do on the front panel then its looking like the main control board is the issue here. As thats the only thing that will stop buttons from working.
As the lights isnt an error code as the error codes are only 1 or 2 spin lights and certain lights to the right. So if you have all spin lights lit then thats not an error code and its looking like the main control board is the issue here im afraid.
Regards