How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: UK Appliance
Satisfied Customers: 19126
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your UK Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

My Siemens dishwasher was on Intensive, and it ran

Customer Question

My Siemens dishwasher was on Intensive, and it ran for five hours. Now it won't drain and I have pushed the reset buttons, to no effect.
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Kelly replied 1 year ago.
Hi, my name is ***** ***** I look forward to helping you! If you have no lights at all, the issue is probably with the electronic control and likely related to the extended cycle time. It is likely that the heater circuit shorted the control PCB and it is now dead. Are you able to separate the door panels to inspect the control PCB?
Customer: replied 1 year ago.
What settings are you looking for? There are no lights on, and I have tried resetting it to no avail.
Customer: replied 1 year ago.
What is a PCB?
Expert:  Kelly replied 1 year ago.
PCB=Printed Circuit Board, the brain of the machine. It is mounted in between the door panels.