How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jamie_2013 Your Own Question
Jamie_2013, Handyman
Category: UK Appliance
Satisfied Customers: 1544
Experience:  worked on appliances for around 6 years
Type Your UK Appliance Question Here...
Jamie_2013 is online now
A new question is answered every 9 seconds

I have a Hotpoint WT761. Am getting and H2O fault code followed

Customer Question

I have a Hotpoint WT761. Am getting and H2O fault code followed by F-01
Reading previous instructions on line I took the top off, identified the plastic tube and disconnected from the red switch at the top of the drum. I tried to blow through but there was total resistance.
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Jamie_2013 replied 1 year ago.
F01 is the motor triac fault. The triac is a component on the main control board. Possible causes are faulty motor,faulty wiring, faulty main board or a combination of these. H2o is a water fault.