How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: UK Appliance
Satisfied Customers: 19089
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your UK Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

My Candy GO4 136/47 washing machine will not empty - I have

Customer Question

My Candy GO4 136/47 washing machine will not empty - I have followed the trouble shooting guide but this did not work.Now matter what cycle I put the machine on it will stop during the wash cycle and the 90min indicator lamp & also the 'very dirty' indicator lamp flashes.
Submitted: 1 year ago.
Category: UK Appliance
Expert:  Kelly replied 1 year ago.
Hi, my name is ***** ***** I look forward to helping you! If you can hear the pump humming or buzzing, the pump filter is likely plugged, There is a clean out for the pump filter in the lower right corner of the front panel, behind the little access door. If that has been cleaned, then you may have a faulty pump. Does the pump run when it should be draining?
Customer: replied 1 year ago.
Hi - sorry been away a couple of days - I think It is best to replace the pump. Can you help me with a schematic diagram with part numbers & also recommend a supplier who could post out the pump to me.
Machine details
Candy - made in Italy
Model - G04 136-47
Serial - 31002494-1021-0913
Type- FCE 2
thanks,
David
Expert:  Kelly replied 1 year ago.
The pump would be available below.
http://service.candy-domestic.co.uk/spares/
As far as schematics, can you double check that model number, please?