hi my hotpoint aquarius wmf760 turned on did nothing flashed up h20 i turned it off and checked the hose and water supply turned it back on it started flashing all the lights then showed error code f-01 what is wrong with my washing thank you michelle norgan
Hi, F01 indicates a fault with the main control board. If you are mechanically inclined, you can remove the rear panel, remove the control board, and check it for burning, corroded contacts, or any other obvious damage. Unplugging and replugging connectors might help. If the board needs to be replaced, it's more economical to have Hotpoint do it than to do it yourself. To check prices, click on Hotpoint for their plans. Let me know what you think. ed
45 years installing and repairing appliances
Our chat has ended, but you can still continue to ask me questions here until you are satisfied with your answer. Come back to this page to view our conversation and any other new information. What happens now? If you haven’t already done so, please rate your answer above. Or, you can reply to me using the box below.
Hi, we seem to have lost contact. I hope my answer was helpful. Let me know if I can help further. Ed