I have a Servis Easi Logic 1300 washer dryer, The lights are on but the machine is not filling with water. Please advise of possible problem. I have cleaned the filter.
Cleaning the filter and trying the machine on different programmes.
Can you post the model number please.
Also what actually happens when you start it going
Is the door locking?
Will the drum spin?
Hi, Here are the numbers from the label on the side.
HiOk if it does this then its more then likely a fault on the main control board at the back. As on there are start relays. Its probelbly them that's at fault here. But to cure this the control board will need to replaced hereIf you need anymore info just get back to me. Regards
Hi, Sorry for delay in replying I've been out. Have you any idea of the cost of a main control board. I don't want to get into repairs and find it costs nearly as much as a new machine.
HiOk a board on these are very expensive. You are looking at about £120. Servis went bust a few years ago so prices for parts are now very expensive these. So given the price and the fact servis are now bust you may be best just replacing the appliance. Regards
nvq level 2 electronics manufactors training courses