Recent Feedback
I have a semi-integrated Neff dishwasher Type S5N28F which has finally broken down. Since it must be nearly 25 years old it owes me nothing. I am planning to replace it with another Neff machine, probably the S41E50, but I want to be sure that a new machine will fit into the available space. From the dimensions shown on your website it looks as if it should be all right, but can I be sure that there is adequate space at the back for pipework? I can’t remove the existing machine myself to check, but I imagine that you have the necessary information in your records and I would be grateful for your help.John Burdett
Hiya,
Can you post the E-Nr number of you machine please?
If not on a label it will be very faintly etched across the top of the inner door.
Thanks
S 4140G0GB/01John
The new machine will fit the same gap that was required for the existing machine.
There is a recess at the bottom rear of the machines for any pipework to run through if the appliance is hard up to the wall.
However, the machine shouldn't be hard up to the wall if you have a standard 600mm deep unit and worktop.
Hope this helps
Experience: Whitegoods engineer working for a multibranded national company in the UK.
That's exactly what I wanted to know. many thanks for your prompt answer.John