How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask NeilWill Your Own Question
NeilWill, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 1274
Experience:  Repaired appliances over seas in europe and Middle east .
Type Your UK Appliance Question Here...
NeilWill is online now
A new question is answered every 9 seconds

where is the lint filter on a hotpoint wml730 as mine wont

Resolved Question:

where is the lint filter on a hotpoint wml730 as mine wont drain
Submitted: 5 years ago.
Category: UK Appliance
Expert:  NeilWill replied 5 years ago.
Thank you for using JustAnswer!
If you have any questions after reading my answer,be sure to let me know.

At this link you will find the User manual with diagrams showing this process below on page 12. "Cleaning the pre chamber"

Cleaning the pump
The washing machine is fitted with a self-cleaning pump
which does not require any maintenance. Sometimes,
small items (such as coins or buttons) may fall into the
pre-chamber which protects the pump, situated in its
bottom part.
! Make sure the wash cycle has finished and unplug the
To access the pre-chamber:

1. using a screwdriver,
remove the cover panel
on the lower front part of
the washing machine (see

2. unscrew the lid by rotating
it anti-clockwise (see
figure): a little water may
trickle out. This is perfectly

3. clean the inside thoroughly;
4. screw the lid back on;
5. reposition the panel, making sure the hooks are securely
in place before you push it onto the appliance.
NeilWill and other UK Appliance Specialists are ready to help you