How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask NeilWill Your Own Question
NeilWill
NeilWill, Home Appliance Technician
Category: UK Appliance
Satisfied Customers: 1274
Experience:  Repaired appliances over seas in europe and Middle east .
25067054
Type Your UK Appliance Question Here...
NeilWill is online now
A new question is answered every 9 seconds

Getting error message e 30 when trting to use hotpoint wdm

Resolved Question:

Getting error message e 30 when trting to use hotpoint wdm73
Submitted: 5 years ago.
Category: UK Appliance
Expert:  NeilWill replied 5 years ago.

NeilWill :

Hello, Thank you for using JustAnswer! If you have any questions after reading my answer,be sure to let me know.

NeilWill :

Did you try unplugging it for three minutes to reset the system?

NeilWill :

It is important to actually cut the power completely before restarting the machine,not just switch it off.

NeilWill :

If this does not help, then we know that E30 may mean you need motor carbon brushes or a motor e30 is no motor action

NeilWill :

E30 indicates a motor fault.


Unplug the appliance from the wall socket, remove the lid and remove the carbon brushes from the motor. You'll probably find them worn out or broken.

Customer:

Passed your replies to my daughter, thanks

NeilWill and 2 other UK Appliance Specialists are ready to help you