How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask SparePartsPro Your Own Question
SparePartsPro
SparePartsPro, Appliance Technician
Category: UK Appliance
Satisfied Customers: 1243
Experience:  Mech / Electrical Tech, Appliance Service Tech, PAT Test Eng
41227295
Type Your UK Appliance Question Here...
SparePartsPro is online now
A new question is answered every 9 seconds

How do I fix my Daughter Kenwood Dishwasher KDW8ST2A with error

Customer Question

How do I fix my Daughter Kenwood Dishwasher KDW8ST2A with error code E4?
Tried reduced water pressure, or no water.
If water put via a bowl it pumps out.
Regards
Bryan
Submitted: 5 years ago.
Category: UK Appliance
Expert:  SparePartsPro replied 5 years ago.
Hi There

This fault code is related to the temperature sensor.
Either the sensor has gone, the element is not heating or the module is failing.
You should be able to test the sensor - NTC - with a multimeter. See if it still has resistance.
You can do the same for the heater element.

regards Tony

Thank you for using Just Answer? Please feel free to use the Green Accept button once happy with your answer.
Customer: replied 5 years ago.
Where is the temperature sensor located?
Expert:  SparePartsPro replied 5 years ago.
If you look on the underside plugged into the side of the sump.
It is wired remotely from the main module on connector position 'RE'
Customer: replied 5 years ago.
Hi.
My daughter is now saying it's not worth repairing the dishwasher, even if your fix works.
So I am stuck
Regards
Bryan