How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Techdesk Your Own Question
Techdesk, Field Service Engineer
Category: UK Appliance
Satisfied Customers: 16407
Experience:  Whitegoods engineer working for a multibranded national company in the UK.
Type Your UK Appliance Question Here...
Techdesk is online now
A new question is answered every 9 seconds

how do i replace the door catch on a Bosch classixx 1200 e

Resolved Question:

how do i replace the door catch on a Bosch classixx 1200 express
Submitted: 7 years ago.
Category: UK Appliance
Expert:  Techdesk replied 7 years ago.


Is it the door latch on the door or the door lock on the machine that you want to replace?



Customer: replied 7 years ago.
door lock on machine
Expert:  Techdesk replied 7 years ago.


Unplug the appliance and open the door.

Take the screws holding the door lock in place out.

Take the door seal retaining ring out.

(Pull the door seal and you'll see the groove close to the front panel, the retaining ring is in there and the spring is normally between 6 and 9 o'clock position).

Take the door seal off.

Reach in and bring the lock to the port hole.

Swap the wires to the new lock.

Fit the new lock in place.

Refit the door seal and refit the retaining ring.


Hope this helps

Let me know how it goes or if you need more help


Techdesk and other UK Appliance Specialists are ready to help you