How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie
Louie, Technician
Category: TV
Satisfied Customers: 2557
Experience:  25+ yrs. experience in the field and 5+ yrs. online, down to component level.
13948492
Type Your TV Question Here...
Louie is online now
A new question is answered every 9 seconds

The service manual you sent me tells me" Is Vsus present at

Customer Question

Mike the service manual you sent me tells me " Is Vsus present at pin 1 of connector SC2? (See previous page for test points location)" I cannot find the test point locations on the previous slide. I find connector SC2 and assume pin 1 is the first pin, I just want to make sure I check the proper way.
Submitted: 2 months ago.
Category: TV
Expert:  Mike G. replied 2 months ago.

what page are you referring to?

Customer: replied 2 months ago.
Slide 70, bottom left in yellow diamond
Expert:  Mike G. replied 2 months ago.

See page 44 for full diagram of connectors including SC2. Check both/either pins, I can't really tell which one is Pin 1 from here.

Customer: replied 2 months ago.
What do I need to set my dmm on?
Customer: replied 2 months ago.
I set it on 200V~ and did not get a reading on either pin. The flow chart tells me this is a bad "P" Board. I will order one and see if this fixes my problem. Thanks again.
Expert:  Mike G. replied 2 months ago.

you're welcome