How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie
Louie, Technician
Category: TV
Satisfied Customers: 2557
Experience:  25+ yrs. experience in the field and 5+ yrs. online, down to component level.
13948492
Type Your TV Question Here...
Louie is online now
A new question is answered every 9 seconds

I hit the wrong button on my TV remote and AUX came up. I

Customer Question

I hit the wrong button on my TV remote and AUX came up. I can't get that off the screen. I want back to channels only please.
Submitted: 10 months ago.
Category: TV
Expert:  Steven replied 10 months ago.

HI, my name is***** understand you have your TV from the proper input and can't get it back I will need to how you have it connected to your cable box or other source you are trying to use, Is it a HDMI input? also what is the make and model of the TV?

Customer: replied 10 months ago.
I don't know if it is an HDMI input. It is an Emerson TV.
Expert:  Steven replied 10 months ago.

Is it connected to cable box?

Customer: replied 10 months ago.
Did you receive my info about the TV
Customer: replied 10 months ago.
Expert:  Steven replied 10 months ago.

Okay how many wires 1 from the cable box to the TV?

Expert:  Steven replied 10 months ago.

Just 1 wire?

Expert:  Steven replied 10 months ago.

Sorry that is automated request from the site I am not in position to use a phone right now but we can continue if you wish through the chat?

Customer: replied 10 months ago.
There is only one wire.
Expert:  Steven replied 10 months ago.

Okay does it screw onto the antenna jack or does it have a flat end that plugs into the input on the TV?

Customer: replied 10 months ago.
They screw into the antenna jack.
Expert:  Steven replied 10 months ago.

okay then most likely your TV needs to be on channel 3. can you use the remote for TV (not the cable box remote) and press the numbers 0 then 3

Expert:  Steven replied 10 months ago.

okay then most likely your TV needs to be on channel 3. can you use the remote for TV (not the cable box remote) and press the numbers 0 then 3

Expert:  Steven replied 10 months ago.

Have you been able to switch to channel 3 on the TV?