How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Electronic Engineer
Category: TV
Satisfied Customers: 15479
Experience:  Over 16 years of experience installing and repairing electronics.
Type Your TV Question Here...
Pete is online now
A new question is answered every 9 seconds

It is showing upside down after installing main board, since

Customer Question

it is showing upside down after installing main board
JA: How long has this been going on?
Customer: since I installed a new main board
JA: What troubleshooting have you tried?
Customer: using the remote but no mirror feature found
JA: The TV expert can solve this for you. Anything else you want him to know before I connect you two?
Customer: just the is a westingon house 32" tv
Submitted: 3 months ago.
Category: TV
Expert:  Pete replied 3 months ago.

My name is ***** ***** I'll be happy to assist with your TV question.

You will need to enter the service menu to flip the screen image.

Are you familiar with the service menu?

Customer: replied 3 months ago.
I tried using the remote but did not see that option. I will need some guidance.
Expert:  Pete replied 3 months ago.

You will need to follow a special procedure to enter service mode.

Note that if you change the incorrect settings you could leave the TV set permanently unusable.

Tere is the procedure to enter service mode:

1. With the TV set turned OFF, Press and Hold the VOL - + Input buttons on the right side of the set. Holding these buttons, press POWER.

2. If done correctly, the Westinghouse Logo on the front of the set will begin to blink.

3. Now, from the Original Remote Control, press the RETURN key. This is not the Enter key, but the curved arrow key on the Remote.

4. You have now entered Service Mode. You can change the screen image settings here.

Kindly rate my service 5 stars at the top of your question page so I am rewarded for my time; tips appreciated :)
You can always reply back if you need further assistance.

Customer: replied 3 months ago.
Pete, this set does not have volume buttons :)...only power button...What is the next suggestion?
Expert:  Pete replied 3 months ago.

Can you let me know the model number please?

(it should be written on the info panel on the rear of the TV)

Customer: replied 3 months ago.
Version TW-69801-U032H
Expert:  Pete replied 3 months ago.

I haven't been able to find a way to access the service mode for this particular model, sorry.

I will open the question up to the other TV experts...

Customer: replied 2 months ago.
Pete, no one seems to be able to help me. Will I get a refund??

Related TV Questions