How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Anthony_Infotech Your Own Question
Anthony_Infotech
Anthony_Infotech, Technician
Category: TV
Satisfied Customers: 14170
Experience:  20+ years experience TV expert (field and bench) 9 approved qualifications in TV-ELECTRONICS
18621325
Type Your TV Question Here...
Anthony_Infotech is online now
A new question is answered every 9 seconds

Tv won't come on, red light blinks 10 times, stop then

Customer Question

Tv won't come on, red light blinks 10 times, stop then repeats 10 blinking.
Submitted: 7 months ago.
Category: TV
Expert:  Anthony_Infotech replied 7 months ago.

Hello

Welcome

10 blinks is an oddball code that could involve 4 or 5 boards any one that could be bad kicking off the code so checks would need to be made with a meter to establish which board is bad, so I need to know if a) is this something you think you can do yourself and b)can you use a volt\ohm meter and small tools?

Anthony

Expert:  Anthony_Infotech replied 7 months ago.

Please respond here thank you

Expert:  Anthony_Infotech replied 7 months ago.

You there please?