How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Mike G. Your Own Question
Mike G.
Mike G., Technician
Category: TV
Satisfied Customers: 6121
Experience:  10 Years Audio Video Repair & Setup
24542549
Type Your TV Question Here...
Mike G. is online now
A new question is answered every 9 seconds

You helped me with my wd-73732 dlp tv a few months ago,

Customer Question

Hey mike , you helped me with my wd-73732 dlp tv a few months ago , finnaly got around to fixing it . It was the formatter board on back of optical drive . I suspect though that the color wheel is bad . The image on tv is now back to normal menues and all but it kinda shimmers . Here's a vid of it https://youtu.be/q8FDeBvbrqg
Submitted: 5 months ago.
Category: TV
Expert:  Mike G. replied 5 months ago.

After replacing that part you need to perform Data Transfer Procedure “Copy Light Engine E2PROM to DM”. See page 42 of the Training Manual previously supplied. This copies color wheel timing from formatter board to DM board.

Customer: replied 5 months ago.
Awesome I'll give that a shot now and get back to you thanks for the help
Expert:  Mike G. replied 5 months ago.

ok

Customer: replied 5 months ago.
Done , still flickers , I'm guessing it's prolly either that sensor for color wheel or color wheel itself (or both) ?
Expert:  Mike G. replied 5 months ago.

ya, start with color wheel