How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie
Louie, Technician
Category: TV
Satisfied Customers: 2557
Experience:  25+ yrs. experience in the field and 5+ yrs. online, down to component level.
13948492
Type Your TV Question Here...
Louie is online now
A new question is answered every 9 seconds

REPLACED THE DLP CHIP AND THE LAMP , BUT STILL GET A STEADY

Customer Question

REPLACED THE DLP CHIP AND THE LAMP , BUT STILL GET A STEADY RED STATUS CODE. WHAT ELSE COULSD BE WRONG
Submitted: 7 months ago.
Category: TV
Expert:  Aric replied 7 months ago.
Power the TV up and let it switch itself off.ON THE TV, press the MENU and INPUT buttons together for 5-8 seconds. If you don't have these buttons, press ACTIVITY and the Channel Down button. On some sets the INPUT button is labeled DEVICE.The status LED will then flash indicating a two digit code separated by a brief pause.It could be three flashes and then two flashes which would be 32.The sequence will repeat 5 times.Can you tell me the code please?
Expert:  Aric replied 7 months ago.
Did you need assistance with this?