How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: TV
Satisfied Customers: 16706
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your TV Question Here...
Pete is online now
A new question is answered every 9 seconds

How to remove back on e5501-b2 to get to the power circuit

Customer Question

How to remove back on e5501-b2 to get to the power circuit board I have removed 15 small screws and 4 small flat screws it seems to hanging up on 4 other screws with no heads and only are threaded part way inside the screws
Submitted: 1 year ago.
Category: TV
Expert:  Pete replied 1 year ago.

Hi Dave,

Expert:  Pete replied 1 year ago.

Once the screws have been removed, you will need to use a knife blade or fine flat edged screwdriver to prise the plastic panel apart.