How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: TV
Satisfied Customers: 15764
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your TV Question Here...
Pete is online now
A new question is answered every 9 seconds

I want to access the service menu insignia nsl46x10a and

Customer Question

i want to access the service menu for my insignia nsl46x10a and can't find the code.
JA: Sometimes things that you think will be really complicated end up being easy to fix. The TV Technician I'm going to connect you with knows all the tricks and shortcuts. Tell me a bit more about what's going on so he can help you best.
Customer: tv has polarization and i may be able to correct it in the service menu. want to try that first before replacing the t-con or main board.
JA: Is there anything else important you think the TV Technician should know?
Customer: just what's above.
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the fully-refundable deposit now. While you're filling out that form, I'll tell the TV Technician about your situation and connect you two.
Submitted: 9 months ago.
Category: TV
Expert:  Pete replied 9 months ago.

Hi there,

To get into the Insignia LCD service menu, do the following:

1. Power on the TV.
2. Adjust the volume to zero
3. With the remote - Input 9876 - then OK within 5 seconds.

If successful, you should come to FACTORY SET MENU

From here, you can find your adjustments under the SERVICE MENU option.

Customer: replied 9 months ago.
When i enter 9876 the go to channel box appears with 9876 but no service menu is appearing. the only ok button i have on the remote is at the top surrounded by the 4 move arrows. i hit that and still nothing comes up. is there something else i should be doing?
Customer: replied 9 months ago.
code 9878 brings up FE information, but code 9876 is accepted and nothing shows up on screen.
Expert:  Pete replied 9 months ago.

Ok, I will check if the other experts have any further ideas on this...