How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Nathan Your Own Question
Nathan
Nathan, Installer
Category: TV
Satisfied Customers: 20323
Experience:  Custom home theater installer, authorized dealer top brands.
59725966
Type Your TV Question Here...
Nathan is online now
A new question is answered every 9 seconds

I can't get (set up) to display on the tv (video 1) using

Customer Question

I can't get (set up) to display on the tv (video 1) using the Cav's remote.
Initially all I could get to display was the Cav's Logo.
Then I selected the set up button and scrolled down to VGA input and by mistake hit enter.
Since then the TV screen opens up to the input screen for this device and then goes blank.
I can still reset the TV input for the regular Satellite HDM1
Submitted: 9 months ago.
Category: TV
Expert:  Nathan replied 9 months ago.

Hello, I’m Nathan, and I’ll be assisting you today. My livelihood depends on your positive feedback, so your satisfaction is my highest priority.

Sorry to hear you’re having trouble.

If you press the INPUT buttons on the side of the tv, repeatedly, it should cycle through the different input modes and let you get back to video/composite from the player.