How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete
Pete, Electronic Engineer
Category: TV
Satisfied Customers: 15756
Experience:  Over 16 years of experience installing and repairing electronics.
30970729
Type Your TV Question Here...
Pete is online now
A new question is answered every 9 seconds

Trying to program my GE TV remote, and when I get to #3 on

Customer Question

Trying to program my GE TV remote, and when I get to #3 on Direct Code, and "3 on Auto Code, after I press TV, the light blinks for about 1/2 sec. but NEVER stays on like the directíos say it should. Therefore, NOTHING works afterwards. I have tried at least 10 times to re-do it to no avail...Plus, I have changed batteries at least 5 times! What can I do to remedy this annoying problem?
Submitted: 11 months ago.
Category: TV
Expert:  Pete replied 11 months ago.

Hi there,

What is the model number of your GE TV remote?

Expert:  Pete replied 11 months ago.

If I know the model number I can advise further...

Pete.