How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie
Louie, Technician
Category: TV
Satisfied Customers: 2557
Experience:  25+ yrs. experience in the field and 5+ yrs. online, down to component level.
13948492
Type Your TV Question Here...
Louie is online now
A new question is answered every 9 seconds

Model FW320C Serial 16917240 the 3 cd changers 't read a cd

Customer Question

Model FW320C Serial 16917240
the 3 cd changers don't read a cd is present. Laser Lens Cleaner does not read either.
how to repair the changers?
Shirlee A McGuire
Submitted: 1 year ago.
Category: TV
Expert:  Nathan replied 1 year ago.

Hello, I’m Nathan, and I’ll be assisting you today. My livelihood depends on your positive feedback, so your satisfaction is my highest priority.

Sorry to hear you’re having trouble, Shirley.

This type of problem is often caused by a contaminated laser lens. You can attempt to clean it by blowing out the disc tray/slot area with a can of compressed air for dusting computers (keep the can upright only so you don't get chemical propellant on the lens).

If this doesn't help, you can try a specialty cleaning disc (Allsop 23321 Ultra Pro Carbon-Edge DVD and CD-Drive Cleaner) which has little brushes that clean the lens more thoroughly. I realize you may have tried one before, but I suggest this specific model.

If neither of these cleaning steps help, then this is more likely a hardware fault, which could include a bad laser emitter or pickup, faulty spindle motor or laser transport, bad d/a converter, etc. Any of these issues would require repair/replacement.