How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jack Your Own Question
Jack
Jack, Technician
Category: TV
Satisfied Customers: 9131
Experience:  40 years experience as audio,video repair and installation tech
39158752
Type Your TV Question Here...
Jack is online now
A new question is answered every 9 seconds

Have a Samsung HL 61 A 650 C 1 F. When I power on it tries

Customer Question

Have a Samsung HL 61 A 650 C 1 F.
When I power on it tries to start then clicks off.
The blue circle lights up for a few seconds and the fans motors start then stop.
A red and green light flash after It shuts down.
Before this the TV started cutting off by it's self. Sometimes in a few minutes other times in a few hours.
I just bought a new power board but it did not solve the problem
Submitted: 1 year ago.
Category: TV
Expert:  Jack replied 1 year ago.

Hello , my name is Jack
Perhaps I can help you with this problem but first could you please reply to me so i know you are there and we can proceed ?

Customer: replied 1 year ago.
I am here
Expert:  Jack replied 1 year ago.

Thanks and please note this before we get started ;
Website charges if you ask for phone call = $18 ADDITIONAL ( not total ).

That being said , i would have a few questions ;

Customer: replied 1 year ago.
ok
Expert:  Jack replied 1 year ago.

which lights blink at the front ?

Is it stanby/temp and timer or or standby and lamp ?

Customer: replied 1 year ago.
I am ready for your questions
Customer: replied 1 year ago.
Standby and lamp
Expert:  Jack replied 1 year ago.

o.k and was that the original problem ?

What prompted you to replace the power board ?

Customer: replied 1 year ago.
Expert:  Jack replied 1 year ago.

you mean that it was the original problem ??

Customer: replied 1 year ago.
Original problem it started shutting off by it's self.
Then it would not come on at all just try to start then the lights would blink
Expert:  Jack replied 1 year ago.

If that is the case then return that power and re-install the old then look for the lamp cover switch .

This blink code indicates an improperly closed door , or defective door switch .

If you are sure this was the original blink code anyway .

Try to re-install the old power board , do you get the same thing ?

Customer: replied 1 year ago.
ok I did take out the lamp to inspect
Expert:  Jack replied 1 year ago.

O.k then make sure that door is close tight and if it is then locate that switch and pull it out then just splice the wires going to it .

If no -one in your house is going to play with that door while the tv is running then you don`t need it

Customer: replied 1 year ago.
great thanks
Expert:  Jack replied 1 year ago.

Much welcome and please do not forget to rate so i can get compensated for my time helping you.

Expert:  Jack replied 1 year ago.

By the way , take a look at the link below;

https://www.dropbox.com/s/vgjkixwv4ldwxt7/2015-08-14_0931.png?dl=0

Expert:  Jack replied 1 year ago.
Please do not open other posts but reply to me here ??
Expert:  Jack replied 1 year ago.

I just closed your duplicate question so you would not get charged again , can you see this reply ?