How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Anthony_Infotech Your Own Question
Anthony_Infotech
Anthony_Infotech, Technician
Category: TV
Satisfied Customers: 13740
Experience:  20+ years experience TV expert (field and bench) 9 approved qualifications in TV-ELECTRONICS
18621325
Type Your TV Question Here...
Anthony_Infotech is online now
A new question is answered every 9 seconds

It want come on. It came on last night & cut right back off

Customer Question

It want come on. It came on last night & cut right back off twice & then it wouldn't come back on
Submitted: 1 year ago.
Category: TV
Expert:  Anthony_Infotech replied 1 year ago.
Hello my name is Anthony
Welcome
Thanks for the Question
I will need the model number please found on the back of the set?
Anthony
Customer: replied 1 year ago.
(Posted by JustAnswer at customer's request) Hello. I would like to request the following Expert Service(s) from yo. Let me know if you need more information, or send me the service offer(s) so we can proceed.
Expert:  Anthony_Infotech replied 1 year ago.
I do not use this format I only use the text format sorry, I consider this the best way to move forwards thanks
I will need the model number please found on the back of the set?
Anthony
Customer: replied 1 year ago.
Classic HD ACL DEL1080p LED LF551EM5 merson
Expert:  Anthony_Infotech replied 1 year ago.
Is there any power-light lit or blinking on the set please?
Anthony
Customer: replied 1 year ago.
no
Expert:  Anthony_Infotech replied 1 year ago.
In every case where their is no power light lit and you are sure their is power reaching the set the back of the set will need to come off (set unplugged from the wall)and some checks carried out using a meter (volt\amps\resistance)this is just to verify if the power-board is bad, are you able to do that yourself?if so please let me know I will provide more details, the most likely suspect as it stands now is the power-board itself.
Please let me know if you can do work or need more info
A positive rating is appreciated thank you.
Regards
Anthony