How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Anthony_Infotech Your Own Question
Anthony_Infotech, Technician
Category: TV
Satisfied Customers: 13531
Experience:  20+ years experience TV expert (field and bench) 9 approved qualifications in TV-ELECTRONICS
Type Your TV Question Here...
Anthony_Infotech is online now
A new question is answered every 9 seconds

In 2009 I purchased a pangoo TV 66cm. widescreen LCD TV LT26S18,

This answer was rated:

In 2009 I purchased a pangoo TV 66cm. widescreen LCD TV LT26S18, that has worked well.

After watching 7 videos over the past week, I am now finding that after inserting a disc I get the display of CLOSE, READING and then instead of switching to PLAY automatically, I get EJECT. And the same display replays.

I have checked the instruction book as well as buttons on the remote control in case I had accidentally cancelled the PLAY function, but have not been able to resolve the problem.

Can you suggest a possible solution? Your advice will be appreciated.

With thanks from Joan O'Toole
Hello my name is Anthony
Thanks for the Question

I may be a few minutes between each request for info thanks for your patience!

Can you hear the disc spin once its inside the machine please?

Does it do this with ALL discs?

How often do you use the player please?

Customer: replied 3 years ago.

Yes, a spinning noise has developed since when I insert a disc.
I have retried the discs that I have recently viewed and the same spinning
noise and recycled CLOSE, READING AND EJECT displays.
I have only recently started using the DVD consistently. Prior, I had used
a DVD intermittently over longer periods.


OK the disc is spinning up but the laser is not reading the table of contents now this can be caused by a dirty lens on the laser so please try this <<click

Also it may just be that the laser is losing its power and will need replacement however its not viable to replace the lasers in this type of unit because of cost.

Please let me know if you need more info
Please dont forget to rate the answer, thank you, XXXXX XXXXX will remain open even after rating.

Many Thanks

Anthony_Infotech and 2 other TV Specialists are ready to help you