Recent Feedback
Push power protector error Went thru all trouble shooting. I think I need to have it repaired. Model # XXXXX Phoenix, AZ
Optional Information: Make: Sony Model: hdx576wf Already Tried: Unplugged and reset Checked ventilation and sprayed compressed air original speakers same code with speakers unplugged
If you have the "Push Power Protector" message even with no speakers plugged into the unit, then the output transistors inside the system have shorted and are putting the unit in this mode to prevent further damage to it. The output stage (transistors), are thermally coupled to the heatsink inside the unit and soldered to the Main PCB- so as such, they are not user replaceable. The average cost for this type of repair is commonly around $175 parts and labor- which is not good news I know. To locate a Service Center in your aream you can use the link below:
www.stereorepair.com
Experience: 10 years installing and repairing TV's and AV