sharp aquos does not recognize hdmi input
different cables, different input devices
Thank you for posting your question on Just Answer! I will be happy to help you with this problem. Can you please give us some more information so I can better answer your questions.-What is the model number for the television? (this can be found on the back of the unit)-How old is the unit?- Do you have this problem while watching all different HDMI devices hooked to this television? (DVD player, cable, satellite, game counsel, etc.) Please give me this information and I will be happy to assist you further. Thank you,Tim Nolan
2 yrs old
No devices work with it. Have tried mutiple cables. Devices work with yrw calbel, but not hi def.
What do you get on the screen, just no signal?Tim
Not even that.
The input selection ignores the device if it is only connected with hdmi. I tried downloading firmware from website, no help either.
So you just get a blank screen?Tim
Cannot get to the screen. The hdmi-connected device is not offered as a choice.
You do not get a choice for input 4 or 5?Tim
no, they are X'd out.
Ok I see why...In your menu there is a place that says INPUT SKIP enter into that with the sharp remote and set them to not skip and then you will be able to select them.If you would like any additional information or have more questions please don’t hesitate to ask! Please never accept an answer until you are 100% satisfied and feel you can leave positive feedback. If I have answered your questions and met your needs then please press the green "accept" button. Otherwise please feel free to ask anything else to get your problem resolved. Positive feedback is always appreciated! Thank you,Tim Nolan