My Proview rx276 model 2600, board 200-100-hx276 rev:d has been replaced with 200-100-hx276 rev:e. It lights up for a flash and goes black. The power LED stays green. Does the rev:e a good replacement or is there another problem and what do i need to fix this problem?
My name is XXXXX XXXXX X'm a Category Moderator on Just Answer.Thanks for your question! This is not a request for more information and I apologize if this message caused you any confusion.I'm sorry that you haven't received an answer yet. Most questions are responded to within the hour, but this can depend on different factors, including the difficulty of your question, how many questions are being posted by customers, whether or not this type of question can be answered in an on line forum and how many Experts are on the site at the time your question posts.I will go ahead and try to find an Expert to assist you with your question and appreciate your patience. You will receive an email notification when an Expert replies to you, just as you did here. Unfortunately, I can not guarantee a time-frame for which yours will be answered and I apologize a head of time if the wait is longer than expected.Please do not reply to this message unless you do not need further help. If that is the case, please let me know and I can assist you with that. When you reply, it locks out the question from the Experts and will slow down their response time to you. If they need more information, they will let you know.Please remember that if you get a satisfactory answer from your Expert to click the green accept button so the Expert is compensated for a job well done. Positive feedback is appreciated by them also. :)If you have any questions regarding deposits or billing, please feel free to use the help link below:http://ww2.justanswer.com/helpBest,WalterModerator
Hi Walter, tks for responding, it doesn't bother me to wait, its xmas time i understand...i would like to give you more info but what is it you need to know?
I have replaced the 200-100-hx276 rev:d thinking it would fix the problem but it still turns on and after a few seconds, the back lights flashes on once and then nothing appears on the screen even when i press menu. However, the power LED turns green and stays green telling me the power supply is ok. So my question is what should i be looking for to fix this problem?
Now that xmas is over i still need an answer to my question, i don't know if you got my last reply , and i am still waiting for someone to adress my question. Should i re post my question or what? Please let me know.