You didn't have to remove the rear cover to do this. If you have your owners manual, the directions are on page 13.
If you don't have that handy, I can describe it to you, but it's all done from the front of the set.
uh-oh! oldest excuse in the world: dog at homework. in my case, it was my nephew.
proceed, please. while i'm waiting i'll put a coupla screws back in.
Sure, let me pull up the info.
possible to email a pdf of the page?
OK, see the drawings that I'll now put up:
Once you have done these steps, just put it back together, but be sure that the lamp door is very securly tightened, or the set will turn on, then shut down, and cause the front red indicator t blink in 3 flash sequences.
Let me know if you need any more help, and thanks for using JustAnswer!
thanks. i'll keep this open just in case.
No problem. Once you're sure everything is OK, would you mind clicking the Accept icon so that I may be paid for my time? I'd greatly appreciate it!
well, so far, so good! instructions didn't say front panel is friction-fitted, and i was afraid of breaking something. i'm used to working on carriers, switches and routers with a smattering of fiber-muxers; & some of that stuff is outright fragile. thanks!