How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Allen Your Own Question
Allen
Allen, Technician
Category: TV
Satisfied Customers: 676
Experience:  37 years tv service with Panasonic, Hitachi ,RCA
25339199
Type Your TV Question Here...
Allen is online now
A new question is answered every 9 seconds

Westinghouse Lcd tv screen says auto scan required how do

This answer was rated:

Westinghouse Lcd tv screen says "auto scan required" how do I fix?

Hi

 

Can you give me the model number?

Customer: replied 7 years ago.
I cannot find a model # XXXXX the TV . It is a 27" Flat sceen lcd

The model number should be on the back of the set. To give you exact detail

on auto scan , I would need the model number. The model number should also be on your instruction manual.

 

Auto scan is a function that checks all available channels and adds them to

a list of channels in your tv.

 

You would go to the menu and find cable/ antenna setup and select which one you are using. After making the correct selection. You should see a menu function for channel

auto scan. You would select auto scan and the set will go into auto channel set.

This could take a few minutes. Once it is completed the auto scan required message

should go away.

 

Allen and other TV Specialists are ready to help you