Hello and thanks in advance! I have a Tatung P46 Plasma TV. The TV will come on with XXXXX XXXXXght when switch on rear is applied and 2 relays click on and maybe back off. After I hit the power button, the XXXXX XXXXXght flashes and then I get a constant green light (no relay sound). There is never anything on the screen. I checked the 4 fuses and they are fine. I have searched to the end of the internet and cannot find anything on a Tatung P46. I found Vizio P46 but not the Tatung. I would like a service manual so I can test the power supply. From what I see it has a good AC input and the red and white output shows 4.2VDC. Any help at all will be very much appreciated!
Hi, thank you for visit just answer:
Did you try this place for your orientation?.
www.tatungusa.com/tatungusa/index1.htm
www.eserviceinfo.com/chassis_model_make/TATUNG_001.html
Can you check if this number are on the power supply?. Because this power supply are available ( www.encompass.com ) ......Is for tatung Model #. P46Power supply number: (NNN) NNN-NNNN/p>
Long time ago I did repair a tatung plasma in my shop, with power supply problem =====defective power supply,3 blown mosfets ,location part #Q221B to Q223B,part Number :IRFP460A=== and I too hard find parts for this TV.....Am not sure if replace with substitute...........I recommended try to find help with this companies. www.shopjimmy.com
www.vancebaldwin.com
Good luck!!..HAve a nice day !! Thank you
Hello and thanks! I finally found a manual but it is for a Gateway 46" Plasma. The parts look identical. The service manual says change the Video Input board, then DIF, then X-Sust. I found parts for the Gateway on eBay but the part # XXXXX XXXXX digit off, I am going to try it and see.
If you feel satisfy with my answer, please check accept button. ( I will be here for future questions)
Thank you and good luck!!