How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Transmissions
Satisfied Customers: 1596
Experience:  16 yrs. experience with auto, manual, & CVT drivelines
2499435
Type Your Transmissions Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

My customer's Mazda fighter Model;UV4G 2.5 with a problem of

Customer Question

My customer's Mazda fighter
Model;UV4G 2.5 with a problem of the sensor on the top of fuel pump which to adjust the shift auto transmission gear,I want to look for a n expert of Mazda to assit me to solve this problem
Submitted: 14 days ago.
Category: Transmissions
Customer: replied 14 days ago.
It's difficult to adjust this sensor ,my problem is the "hold" was flashing on the board,when this light flash the auto gear change not very good!
If I adjust the sensor too high the auto gear not change gear,but the "Hold" light not flashed can any expert can assit me to solve this problem?
Expert:  Greg replied 14 days ago.

Hi, I'm Greg (Indy-Tech).
Welcome to JustAnswer. I'm reviewing your question now, and will post back with your reply ASAP.
Rgds Greg.

Expert:  Greg replied 14 days ago.

Hi Foo

The TPS adjustment .

Do you have the use of a scan tool that has live data .

If not do you have an ohm meter .

Have you checked for any malfunction codes .

Greg

Customer: replied 14 days ago.
I used the ohm meter,I don't know how to checked the malfunction code,and also don't have any scan tool,my workshop have a scanner diagnosis for those newer cars only ?
Can you let me know how to check the malfunction code?
Thanks for advise
Expert:  Greg replied 14 days ago.

What year is this Mazda .

Is there a 16 pin DLC under the dash on the drivers side .

Where did this truck come from ,as i see you are in the US and this was not sold in the US.

Greg

Customer: replied 14 days ago.
No I am not in US I stay in Malaysia,and this truck is the old model,don't have DLC,it got a self plug diagnose on the left side near the engine,sorry now our time is 6;30pm evening,or tomorrow when my workshop open I will take the photo send to you then you know what I mean,
Customer: replied 14 days ago.
This truck assembly in Tailand .any ideal for this type of truck?
Expert:  Greg replied 14 days ago.

Okay sounds good . will check this out for you

I lived in Malaysia for 4 months back in 1992.loved it .

What year is , and i take it you have the WL 2.5L engine .

Greg

Customer: replied 14 days ago.
I will check out from my customer then I will send to you by our time tomorrow morning you are in US,which state?
Thanks for the responded,hope that you can solved my problem,I will give you all the details of this truck ASAP thank you,
Customer: replied 14 days ago.
Hi good morning!
The truck is 2006 with WL 2.5L auto transmission,the photoes shown diagnosis box,this need to have a wire to link them to see the "Hold" light flashing on board then will know what is the fault code,is that right ?pls advise thanks!
Customer: replied 13 days ago.
Hi !hope that you have found the good answer for me!
Thanks!