How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Gm Tech Cam Your Own Question
Gm Tech Cam
Gm Tech Cam, Service Technician
Category: Transmissions
Satisfied Customers: 29457
Experience:  11 years experience, specializing in Trans, Elec and Dmax
Type Your Transmissions Question Here...
Gm Tech Cam is online now
A new question is answered every 9 seconds

I have a 2010 Chevy Silverado 1500 I put a new transmission

Customer Question

I have a 2010 Chevy Silverado 1500 I put a new transmission now the gear indicator does not work on the dashboard and it will not shift
Submitted: 7 months ago.
Category: Transmissions
Expert:  Gm Tech Cam replied 7 months ago.

Hi there, I am Cam. Was this a 4 speed or 6 speed transmission?

Customer: replied 7 months ago.
Expert:  Gm Tech Cam replied 7 months ago.

Ok, I have bad news, Well its not horrible but its not what you want to hear. your transmission needs to be programmed. The reason is this, the value body had inside it the transmission module and when you replaced that transmission, you replaced the module as well. The module needs to be programmed to the VIN of the vehicle to work, otherwise its brain dead if you will. This programming can only be done by a shop, and usually GM dealers or very well equipped shops can do this.

Related Transmissions Questions