How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Transmissions
Satisfied Customers: 22135
Experience:  Chrysler/Dodge/Jeep master tech ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans Specialist
9825021
Type Your Transmissions Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

It wont shift out of first gear getting p0700 and U0101

Customer Question

It wont shift out of first gear getting p0700 and U0101 codes
JA: How old is the transmission? Have you checked the brake switch?
Customer: Its and 05
JA: What is the model of your '05 Chrysler?
Customer: Sebring 2.4l 4cyl
JA: Are you fixing your Sebring yourself? What have you tried so far?
Customer: Yes and reseting the computer
JA: Anything else you want the mechanic to know before I connect you?
Customer: No thank you
Submitted: 5 months ago.
Category: Transmissions
Expert:  sprinkles08 replied 5 months ago.

Hello and welcome to JustAnswer!

P0700 sets in the powertrain control module when there is a fault code in the transmission control module. U0101 sets when there is no communication with the TCM, but without knowing what module this was set in you don't necessarily know if there is a TCM issue.

Do you have a scan tool that can actually communicate with the TCM to see if it is awake, and if so what fault codes are set there?