How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Transmissions
Satisfied Customers: 1591
Experience:  16 yrs. experience with auto, manual, & CVT drivelines
2499435
Type Your Transmissions Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

2003 audi a4 shifting funny/limp mode following codes

Customer Question

2003 audi a4 shifting funny/limp mode
following codes
Thursday,04,August,2016,15:24:54:63715
VCDS Version: Release 15.7.4 (x64) Running on Windows 8.1 x64
www.Ross-Tech.com
Address 02: Auto Trans Labels: 01V-927-156.lbl
Control Module Part Number: 8E0 927 156 P
Component and/or Version: AG5 01V 1.8l5VT USA 0910
Software Coding:(###) ###-####
Work Shop Code: WSC 63251 000 00000
VCID: 3B75E1CD799D43E66B-5140
3 Faults Found:
17140 - Shift Solenoid 2 (N89)
P0756 - 003 - Open or Short to Ground - Intermittent
Freeze Frame:
RPM: 2688 /min
RPM: 2272 /min
RPM: 1120 /min
(no units): 0.0
Torque: 128.0 Nm
Temperature: 74.0°C
T.B. Angle: 52.0°
(no units): 2.0
17140 - Shift Solenoid 2 (N89)
P0756 - 003 - Open or Short to Ground - Intermittent
Freeze Frame:
RPM: 2688 /min
RPM: 2272 /min
RPM: 1120 /min
(no units): 0.0
Torque: 128.0 Nm
Temperature: 74.0°C
T.B. Angle: 52.0°
(no units): 2.0
17142 - Shift Solenoid 2 (N89)
P0758 - 003 - Circuit Failure - Intermittent
Freeze Frame:
RPM: 2688 /min
RPM: 2272 /min
RPM: 1120 /min
(no units): 0.0
Torque: 128.0 Nm
Temperature: 74.0°C
T.B. Angle: 52.0°
(no units): 2.0
Submitted: 4 months ago.
Category: Transmissions
Expert:  Wolfgang replied 4 months ago.

Thanks for choosing Just Answer . I'm Wolfgang here to help!!

I am confident we can resolve your problem together. Please
understand that I don't know your skill level. In most cases when you have a problem
with the way the vehicle performs, specialized tooling is required to acquire computer
data/information or engine testing results. We didn’t build these complicated vehicles; we
just diagnose and fix them. Also understand that I can't see, smell, hear, or touch the
vehicle either, so it may take a few replies to get to satisfactory results. I am also going to
direct you with the fastest, easiest and most common things to check first. Please be
patient and permit me to do what I do best.
I also try to give all of the information you may need, expecting a “positive rating” in
return. I will also continue assisting you after you have rated me, if necessary. If there
is any reason I cannot get a positive rating, please let me know why “in advance”, so I
can go another direction for you. I am sorry you’re having this problem; I’ll help you
through it.
Below is my first answer or request for more information. If you do not understand it, or you need more information from me, or need me to go in more detail.

is the passenger side front floor wet . under the carpet is the transmission control module in a black box . remove black box and open to see if there is moisture .

please let me know!!

Customer: replied 4 months ago.

its dry

Expert:  Wolfgang replied 3 months ago.

on the a pillar on the same side there is an electrical connector where it needs to be checked for corrosion . please inspect the connectors by separating and check for corrosion!!

Related Transmissions Questions