How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Transmissions
Satisfied Customers: 22301
Experience:  Chrysler/Dodge/Jeep master tech ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans Specialist
9825021
Type Your Transmissions Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

05 Town and Country 3.8 Intermittent loss of power up hills.

Customer Question

05 Town and Country 3.8 Intermittent loss of power up hills. map and temp sensor codes. Replace both sensors ran good for a long time but problem has returned. So did the map and temp sensor codes.
Larry
Submitted: 8 months ago.
Category: Transmissions
Expert:  david craig replied 8 months ago.

Hi Larry, Im David, lets try to figure this out. what are the code numbers you are getting?

Expert:  david craig replied 8 months ago.

do you still need assistance?

Expert:  david craig replied 8 months ago.

hello????

Expert:  sprinkles08 replied 8 months ago.

Hello and welcome to JustAnswer!

If you're setting multiple sensor codes at the same time most likely you have a reference voltage issue. If the 5v reference pulls low or shorts to voltage it will affect multiple sensors at the same time. This could be a wiring issue, internally shorted sensor or an issue in the powertrain control module.

What P codes are currently setting?