How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Transmissions
Satisfied Customers: 1642
Experience:  16 yrs. experience with auto, manual, & CVT drivelines
2499435
Type Your Transmissions Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

Working on a 04 cts with 3.6 engine. I replaced the 4-5

Customer Question

Working on a 04 cts with 3.6 engine. I replaced the 4-5 shift solenoid and transmission and filter. Im following alldata and prodemand guide on filling. Im having trouble putting more fluid in the transmission after the forth quart. I shifted through the gears and let idle while filling. Any ideas?
Submitted: 7 months ago.
Category: Transmissions
Expert:  Robin Everett replied 7 months ago.

what is the vehicles vin number

Expert:  Robin Everett replied 7 months ago.

have you checked the fluid level at plug 36. this is where you check the fill level. first you have to run the vehicle through the gears 5-10 secs each. then you can check the fluid level. you must have the vehicle running in the park position on a level surface to check.

Expert:  Robin Everett replied 7 months ago.

trying to get you a diagram on here so that you can see the location of the plug that is used to check the fluid level

Expert:  Robin Everett replied 7 months ago.

there goes the diagram

don't want to over fill the transmission. could cause overflow at the vent on the top of the transmission if it has one.

Customer: replied 7 months ago.

This is the vin and we did check the proper plug 36 but would only take 4 quarts. Now it will shift into fifth for a few seconds and then itll kick it out 1G6DM577740180463

Expert:  Robin Everett replied 7 months ago.

Are there any codes set in the PCM? If so what are they?

Related Transmissions Questions