How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08
sprinkles08, ASE Certified Technician
Category: Transmissions
Satisfied Customers: 21600
Experience:  Chrysler/Dodge/Jeep master tech ASE Master and Advanced Certified, Chrysler/Dodge/Jeep Master Certified, Trans Specialist
9825021
Type Your Transmissions Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

I have a 2002 dodge 1500 4x4 with a 5.9. the transmission is

Customer Question

I have a 2002 dodge 1500 4x4 with a 5.9. the transmission is starting to act up, changed filters and fluid, tranny seems to be starting to slip
JA: What is the model of your '02 Dodge?
Customer: i dont know what you mean
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: no i am just trying to get an idea of what is wrong
JA: Anything else you think the mechanic should know?
Customer: no
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Dodge Mechanic about your situation and then connect you two.
Submitted: 5 months ago.
Category: Transmissions
Expert:  sprinkles08 replied 5 months ago.

Hello and welcome to JustAnswer!

Actual slippage would indicate an internal failure, with different possible causes depending on the gear point involved. It could be a clutch issue, the kickdown band, or possibly a line pressure issue.

You may not actually be feeling a slip though. You may have a governor pressure problem or the trans could actually be in limp in.

Can you describe exactly what symptoms you're experiencing?

Have you checked for fault codes?

Related Transmissions Questions