How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chris (aka- Moose) Your Own Question
Chris (aka- Moose)
Chris (aka- Moose), Technician
Category: Transmissions
Satisfied Customers: 1596
Experience:  16 yrs. experience with auto, manual, & CVT drivelines
2499435
Type Your Transmissions Question Here...
Chris (aka- Moose) is online now
A new question is answered every 9 seconds

I tried to rebuild a F4A51 transmission, do you have

Customer Question

Hello, I tried to rebuild a F4A51 transmission, do you have the thickness of clearance dummy plate (MB991632), I have to make one, thanks
Submitted: 7 months ago.
Category: Transmissions
Customer: replied 7 months ago.
Please answer me, I need to know what is the thickness and diameter of the MB991632 tool, that is used when rebuilding a F4A51 Hyundai transmission. I need to build one because I can't buy one in my country. Thanks a lot.
Customer: replied 7 months ago.
Please I need HELP!!!!!!
Expert:  Tim's Auto Repair replied 7 months ago.
Hi, My name is ***** ***** for the delay.I will do my best to assist you.what is the year,make and model that it is out of?
Customer: replied 7 months ago.
Hyundai, santa fe , 2002, v6 engine, transmission number F4A51, please notice the question I asked you before
Expert:  Tim's Auto Repair replied 7 months ago.
ok.i will give you what i have on this one..
Customer: replied 7 months ago.
OK, when?, thanks
Expert:  Tim's Auto Repair replied 7 months ago.
one moment..thanks
Expert:  Tim's Auto Repair replied 7 months ago.
my program isnt opening,,,
Expert:  Tim's Auto Repair replied 7 months ago.
stand by,one of the other guys will be right with you
Customer: replied 7 months ago.
Ya Please answer me, I need to know what is the thickness and diameter of the MB991632 tool, that is used when rebuilding a F4A51 Hyundai transmission. I need to build one because I can't buy one in my country. Thanks a lot.
Customer: replied 7 months ago.
I sent to you the picture, help me please
Customer: replied 7 months ago.
I need, you guys, refund my money, this is unacceptable, 24 hours, no answer

Related Transmissions Questions