How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Daniel Wilson Your Own Question
Daniel Wilson
Daniel Wilson,
Category: Transmissions
Satisfied Customers: 4661
Experience:  Owner at DJ Wilson
65405794
Type Your Transmissions Question Here...
Daniel Wilson is online now
A new question is answered every 9 seconds

Transmissions hd 40/60: I have a 45/60 in a truck and we have

Customer Question

I have a 45/60 in a truck and we have no power to the shift selector
Submitted: 10 months ago.
Category: Transmissions
Customer: replied 10 months ago.
That is an HD 40/60
Expert:  Daniel Wilson replied 10 months ago.
Hi Randy, My name is***** will be glad to try to help. What chassis is this in?
Expert:  Daniel Wilson replied 10 months ago.
Click here FYI and schematics to helpOperation Troubleshooting/service/schematics
Customer: replied 10 months ago.
I is in a Oshkosh front discharge concrete mixer
Expert:  Daniel Wilson replied 10 months ago.
Thanks for the update. I used to maintain a fleet of them actually. The cab wiring will be Oshkosh and the cabs see so much water, etc. take a close look at corrosion in the harness and connector pins, fuses, and relay connections. Try swapping relays around with a known good one. The links I poster will help with the Allison side of the wiring. Let me know
Expert:  Daniel Wilson replied 10 months ago.
Hi Randy, Did you get this resolved?