How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Brad Your Own Question
Brad, Dealer Technician
Category: Transmissions
Satisfied Customers: 6716
Experience:  ASE Master,(L-1) Certified, Transmission Specialist
Type Your Transmissions Question Here...
Brad is online now
A new question is answered every 9 seconds

My dodge has code p0700, the transmition is not shifting out

Customer Question

my dodge has code p0700, the transmition is not shifting out of first gear
JA: Tell me a bit more about what's going on so he can help you best.
Customer: i have done some reading and decided i would try to replace the speed sensor input and output. the code continues to appear and the trany continues to stay in first gear
JA: Are you hoping to fix this yourself?
Customer: yes
JA: Great! What have you tried so far?
Customer: i replaced the speed sensors on the transmission input and output
JA: Is there anything else important you think the Dodge Mechanic should know about your Dodge?
Customer: no
JA: I'm sending you to a secure page on JustAnswer so you can place the $5 fully refundable deposit now. While you're filling out that form, I'll tell the Dodge Mechanic about your situation and connect you two.
Submitted: 6 months ago.
Category: Transmissions
Expert:  Brad replied 6 months ago.
Do you know what codes are in the transmission control module?
Customer: replied 6 months ago.
no not really i hooked up a reader under the dash and all i got was p0700
Customer: replied 6 months ago.
how do i get codes for the tcm on my car?
Expert:  Brad replied 6 months ago.

You will need a scantool to retrieve the codes from the TCM.. A code reader will only retrieve the P0700 which only tell's you that you have additional codes in the TCM that need to be read. Once you have the codes post them here so i can see what's going on..

Customer: replied 6 months ago.
what if i do not have axes to a scan tool
Expert:  Brad replied 6 months ago.

Then you will need to see if your local Advanced Auto or parts store will read them free of charge and post them here.. You can't repair your transmisison until you know what's wrong..

Customer: replied 6 months ago.
ok the codes i got was:
P0755-solenoid circuit error
P1792-battery was disconnected

Related Transmissions Questions